The Story
HTS is the premium support for high-temp products, unlike most support filaments, which are not designed to withstand the heat required to print the top-end of performance materials.
Works ideal with the following ThermaX materials:
- PEKK [PolyEtherKetoneKetone]
- PEEK [PolyEtherEtherKetone]
- PEI made using ULTEMā¢
Support Removal:
- This is break-away support and does not dissolve.
- High-Temp support is best removed while printed part is still warm.
- If the finished printed part cools completely and the support removal gets too difficult, you can re-warm the part in the printer chamber or an oven not exceeding the Tg of the model material you are printing with.
Filament Specifications:
1.75mm +/- 0.05mm in diameter
Technical Data Sheets and Safety Data Sheets can beĀ locatedĀ here.
ULTEMā¢ is a registered trademark of Sabic Innovative Plastics.
Description
HTS is the premium support for high-temp products, unlike most support filaments, which are not designed to withstand the heat required to print the top-end of performance materials.
Works ideal with the following ThermaX materials:
- PEKK [PolyEtherKetoneKetone]
- PEEK [PolyEtherEtherKetone]
- PEI made using ULTEMā¢
Support Removal:
- This is break-away support and does not dissolve.
- High-Temp support is best removed while printed part is still warm.
- If the finished printed part cools completely and the support removal gets too difficult, you can re-warm the part in the printer chamber or an oven not exceeding the Tg of the model material you are printing with.
Filament Specifications:
1.75mm +/- 0.05mm in diameter
Technical Data Sheets and Safety Data Sheets can beĀ locatedĀ here.
ULTEMā¢ is a registered trademark of Sabic Innovative Plastics.
